NIPPON GEAR

NIPPON GEAR

Valve actuator

CWG series

Outline

The CWG series motors are economic and compact worm gear reducers for general industries, such as water supply and sewerage systems, iron, and steel that were developed as manual operation devices for various kinds of devices, such as valves for 90-degree rotation, including butterfly valves and ball valves.
In addition, combining the CWG series worm gear reducer and our electric operation device enables electric operation.

Features

  • – The double sleeve structure facilitates easy changes of the key position relative to the valve stem.
  • – The rotational direction and position of the input shaft can be chosen freely.
  • – The double seal structure of the terminal block protects the electrical room.
  • – The dustproof and waterproof performances correspond to IP67.
  • – The stopper angle is variable by +/- 5 degrees at both travel ends.

Specifications

Model size Reduction ratio Allowable output torque
(N・m)
Mechanical advantage
(Reduction ratio x Efficiency)
Allowable input torque
(N・m)
Input rotation frequency
(rev)
Maximum valve stem diameter
(mm)
Mounting flange
(ISO 5211)
CWG-00 Electric 40:1 1,200 13.5 88.8 10.0 36 F12
Manual 80:1 26.0 76.8 20.0
CWG-10 Electric 44:1 2,000 14.5 138.2 11.0 46 F14
Manual 88:1 26.0 76.8 22.0
CWG-20 Electric 48:1 2,800 15.2 184.0 12.0 60 F16
Manual 120:1 34.2 81.9 30.0
CWG-30 Electric 52:1 4,300 16.2 265.9 13.0 75 F16
Manual 130:1 36.4 118.1 32.5
CWG-35 Electric 52:1 6,100 16.6 366.6 13.0 80 F20
Manual 130:1 37.4 162.9 32.5
CWG-40 Electric 56:1 10,400 17.4 597.2 14.0 95 F25
Manual 420:1 102.5 101.0 105.0
CWG-50 Electric 60:1 15,900 18.7 852.1 15.0 115 F30
Manual 450:1 109.8 144.8 112.5
CWG-60 Electric 64:1 32,800 19.3 1702.7 16.0 140 F35
Manual 768:1 180.5 181.7 192.0

Documents and data Downloads

TOP